Playing Card Holder
Results: 34
2-Piece Fan Card Holder Set
The 2-Piece Fan Card Holder Set are playing card holders designed for use by individuals with fine motor and grasping disabilities or arthritis. The set comprises two brightly colored plastic holders which fan out to hold up to 15 cards. The fan can be held or placed on the table. DIMENSIONS: Card holder is 8 x 4 inches. COLOR: Blue.
4-Piece Round Card Holder
The 4-Piece Round Card Holder Set is a set of playing card holders designed for use by individuals with fine motor and grasping disabilities. The set is comprised of four brightly colored plastic discs which hold the playing cards together. The holders are made of two plastic disks with foam pads in between them. DIMENSIONS: Discs are 2.5 inches. WEIGHT: 0.5 ounce each.
4-Piece Triangular Card Holder
The 4-Piece Triangular Card Holder is a set of playing card holders designed for use by children and adults with fine motor and grasping disabilities or arthritis. These triangle-shaped card holders make it easy for the user to hold large amounts of cards. The holders can be held in the hand by the user or set on the table using the flat bottom of the card holder. Each holder consists of two plastic disks with a built-in spring to hold them in place. COLORS: Red, blue, yellow, and white.
Card Holder
The Card Holder is a playing card holder designed for use by individuals with upper extremity disabilities.This holder has a card slot with a clear barrier to keep cards in position. An extended front lip holds pencils and coins. These holders are sold individually or in sets of four with a deck of low vision playing cards. SIZES: Sizes are available for standard playing cards or for extra-large playing cards. DIMENSIONS: The standard card holder is 10 inches long and the holder for extra-large
Card Holder
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: To provide an opportunity for individuals with fine motor and grasping disabilities to hold playing cards during a recreational game of cards.
Card Holder
"DO IT YOURSELF" ENTRY --- PURPOSE: To enable individuals with grasping and other upper extremity disabilities to hold playing cards. To make this holder, put the lids together, top to top and lay them on the table. Place one of the buttons in the center of the stacked lids and poke two holes through the button holes into the center of the tub lids with the needle. Pick up the stacked items and place the second button over the holes on the back side. Sew together. MATERIALS: Two buttons, two sma
Card Holder
---- “DO IT YOURSELF” ENTRY --------- PURPOSE: To create a card holder for individuals with grasping disabilities. To create this DIY card holder, put the lids together, top to top and lay them on a table. Then put one of the buttons in the center of the stacked lids. With the needle, poke two holes through the button holes into the center of the tub lids. Finally, pick up the stacked items and place the second button over the holes on the back side and sew together. Coffee can tops can be used
Card Holder
The Card Holder is designed for use by individuals with poor grip, fine motor and mobility disabilities to help them hold playing cards. The device consists of two plastic discs held together by a spring. Once sorted, the card holder will then grip the cards throughout the game, in suit, run or color. Device holds up to 14 cards and playing cards not included.
Card Holder (Model H71254)
The Card Holder, model 71254, is a hand held device designed to assist individuals who lack finger strength or dexterity to hold a hand of cards. The holder consists of two plastic disks with foam pads in between that allows cards to be added or removed without disturbing the other cards. Sold in boxes of 4 holders. WEIGHT: 1/2 ounce.
Card Holder - Clear Plastic
The Card Holder-Clear Plastic is a playing card holder designed for use by individuals with upper extremity, fine motor, or grasping disabilities or arthritis. This slotted clear plastic holder keeps playing cards at an angle to improve visibility and provides hands free viewing. The device can also be used to hold recipes or memos. DIMENSIONS: 10 inches long. WEIGHT: 0.2 pound.
Card Holder.
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Boxes to hold playing cards for a person with restricted hand movement or use of one hand. Describes two simple devices to hold playing cards upright in a row: A small cardboard box, such as a candy box, with the box slipped inside the upsidedown cover; and a wooden block about 10 by 3 by 1 1/2 inches with two lengthwise slots sawed into it. Includes photographs. SKILLS REQUIRED: Woodworking. AUTHOR: Kernaleguen, A TITLE: Clothing Designs for the Handi
Card Holder.
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Device on which cards can be arranged and held by persons with limited hand strength. Card holder made with two plastic coffee can lids turned back to back, fastened together with a pop rivet in the center. Sponge material can be glued to the front and back to make it easier to hold. Includes drawings. SKILLS REQUIRED: Assembly. AUTHOR: Independence Factory TITLE: Make it Cheap: Volume 3 REF: Middletown, Ohio: Independence Factory NARIC CALL NUMBER: R1
Card Player Card Holder
The Card Player Card Holder is fan shaped playing card holder is designed for people with limited finger strength and dexterity. The Card Player Card Holder holds cards snugly and provides a clear view of cards. It can be held comfortably by a weakened or arthritic hand and can stand by itself on two non-skid legs. The cards will not fall out if the holder is tilted. The holder is also works for phone messages, recipes, shopping lists, coupons, receipts, reminders, etc.
Deluxe Card Rack (Model 9430)
The Deluxe Card Rack, model 9430, is a playing card holder designed for use by individuals who have difficulty holding cards in their hands. This walnut-stained fiberboard rack holds all cards needed for any game. Features include slanted grooves and tiered rack for good visibility to the user, but not to opponents. DIMENSIONS (LxW): 9.5 x 5 inches. COLOR: Walnut.
DIY OT Playing Cards Holder
The DIY Playing Card Holders are homemade playing card holders for a 7-card game of Uno. Playing card games can be challenging for people with upper extremity disabilities such as people with limited dexterity, ataxia, and one hand. These DIY Playing Card Holders are solutions to the inability for these people to see all 7 of their cards at once. These DIY Playing Card Holders allow people with disabilities and small hands to hold their Uno cards with ease. There are 6 options suggested.
DIY Playing Card Holder
The DIY Playing Card Holder is a do it yourself product designed for people with upper extremity disabilities to hold their playing cards.
Diy Playing Card Holder
DO-IT-YOURSELF ENTRY --- PURPOSE: Kids with fine motor issues (including very young typically-developing children) can find it difficult to play the card games. And if the user has no hand use and someone else has to show them their cards without peeking, it can ruin the game. This DIY fix allows for ease of card holding and transfer.
INSTRUCTIONS: To make the holder, take two old CDs and attach them together by placing superglue only around the innermost edge. Make sure to offset them by about
Easy Cardholder
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: To assist children and adults with fine motor and grasping difficulties participate in a card game by using a phone book to hold the card.
Foam Cardholder
DO IT YOURSELF ENTRY --- PURPOSE: To create a lightweight playing card holder for a young child with disabilities. Simply use a piece of foam and cut a diagonal shelf for the cards to sit in. MATERIALS: Light weight piece of foam. TOOLS: Cutting knife. SKILLS: Cutting. TITLE: Foam Cardholder. JOURNAL: Ideas to share: Tots n’ Tech. REF: http://www.asu.edu/clas/tnt/home_files/ideas/communication/picture/foamc.... PAGES: 1 with cover. Idea submitted by: Maria Jones, Oklahoma. For more information c
Four Suiter Card Holder (Model Nc29103)
The Four Suiter Card Holder, model NC29103, is a playing card holder designed for use by individuals with fine motor or grasping disabilities or arthritis. This wooden holder has four angled slots to hold cards and aid in visibility. DIMENSIONS (WxD): 9.5 x 5 inches. COLOR: Natural wood.
Hairbrush Card Holder
“DO IT YOURSELF” ENTRY --- PURPOSE: To create a card holder for individuals with grasping disabilities. The hairbrush holds the cards in place while removing the need for an individual to hold his or her cards during card games such as Old Maid, Go Fish, or Crazy 8’s! For individuals requiring more support and stability, Velcro can be used to secure the hairbrush to a non-skid placemat. TITLE: Hairbrush Card Holders. JOURNAL: Ideas to share: Tots n’ Tech. REF: http://www.asu.edu/clas/tnt/home_fi
Milbat Playing Card Holder
The Milbat Playing Card Holder is a playing card holder designed for use by individuals with arthritis, hand tremors, or use of only one hand. This upward curved device has three rows with elevated slots to keep cards in position. The holder can be placed on a table or any flat surface and can accommodate 15 cards per interval.
Piatnik Deluxe Card Caddy
The Piatnik Deluxe Card Caddy is a playing card holder designed for use by individuals with upper extremity, fine motor, or grasping disabilities or arthritis. This holder stands on a table or can be held in the hand and holds up to 25 cards. DIMENSIONS (WxH): 8 x 3.5 inches.
Plastic Card Holder
The Plastic Card Holder is a playing card holder designed for use by individuals with reduced finger control or disabilities of the hand. Made of clear plastic for greater visibility, these holders rest on the table top, hold cards upright, and feature a front ledge for pencils or coins. DIMENSIONS: Available in 10 or 15 inches long.
Plastic Card Holder (Model 9431)
The Plastic Card Holder, model 9431 is a plastic playing card holder with a deck of low vision playing cards designed for use by individuals with low vision who have difficulty holding cards. DIMENSIONS (HxLxW):1.25 x 10 x 2 inches.
Plastic Card Holder (Model Nc29102)
The Plastic Card Holder, model NC29102, is a lightweight playing card holder designed for use with limited grasping ability and manual dexterity. The unit consists of a base with a card slot in the top. DIMENSIONS: 2 x 1 3/8 x 9 inches. The card slot tapers from .5 inch to 1/8 inch.
Playing Card Holder
The Playing Card Holder is a playing card holder designed for use by individuals with low vision, arthritis, or fine motor or grasping disabilities. This clear acrylic holder holds cards snugly in an upright position. The unit can also be used with recipe cards and instructions. Pencils or small coins can fit on the extended front of the holder. DIMENSIONS: 10 inches long. WARRANTY: 12 months on parts and labor.
Playing Card Holder
The Playing Card Holder is a slotted holder designed so that cards can be added or removed easily. The holder is made of ABS plastic and is cleanable. The base of the holder has a small lip and extends far enough to hold a writing utensil. People with pain and/or limited use of their hands will find using this holder much easier than trying to hold multiple cards in one hand. The slot is designed so that cards can be easily added or removed. Also holds Mah-Jongg tiles, recipes or memos. Pencils
Playing Card Holder
DO IT YOURSELF ENTRY --- PURPOSE: To enable individuals with arthritis or grasping disabilities to play cards. Included in a chapter entitled "Living Room & Leisure Activities," this article provides detailed instructions with illustrations for making a set of four playing card holders. The base is formed of 1 x 2 inch lumber and two pieces of molding are glued to the top with a slot in between to hold the cards. MATERIALS: Four foot long piece of 1 x 2 inch lumber, an eight foot long piece
Playing Card Holder (Model 614600)
Metal playing card holder. Unique tension device holds 13 cards. Adhesive bottom holds firmly to table. For one handed card playing.
Playing Card Holder (Model Bk9431)
The Playing Card Holder, model 9431, is a playing card holder designed for use by individuals with fine motor and grasping disabilities. Features include extruded 2-inch wide base that is 1 3/8 inches in height, and a 1/2-inch slot that narrows to 1/8 inch for easy entry of cards. DIMENSIONS: The holder is 10-inches long.
Playing Card Holder (Model H7125400112)
The Playing Card Holder, model H7125400112, is designed for use by individuals with arthritis or other grasping or upper extremity disabilities. The holder has two clear plastic tiers and a hardwood base with non-skid rubber pads. The plastic tiers hold up to 18 cards. DIMENSIONS (HxLxW): .75 x 2.5 x 6 inches. Warranty: 12 months parts and labor.
Pool Noodle Card Holder
This Pool Noodle Card Holder is a holder made out of a pool noodle for playing cards designed for people with upper extremity disabilities to be able to hold a set of playing cards. By: The Brown Bag Teacher http://thebrownbagteacher.blogspot.com/2015/06/teacher-hack-pool-noodle-card-holders.html
Three Slotted Card Holder
The Three Slotted Card Holder is a playing card holder designed for use by individuals with upper extremity disabilities. This solid wood block has three angled grooves for three rows of cards. DIMENSIONS: 7 inches wide.